Air Quality
Anemometers
Barometric Pressure
Communication Gateways
Complete Weather Stations
Data Loggers
I/O Modules
Lightning Detection
Rain Gauges
Temperature Humidity Sensors
Tornado Alert
Wind Switch
Apogee Instruments
Boltek
Campbell Scientific
Davis Instruments
Lufft
Ocean Controls
Onset
RM Young
Overview
Connects sensors with pulse outputs to data loggers with Smart Sensor inputs. Compatible with electronic switch closures such as FET or open-collector outputs, or CMOS-level logic signals with a maximum input frequency of 120 Hz (120 pulses per second). See how the pulse recorder works.
Features
- Plug-n-play adapter for pulse output sensors
- Automatically recognized by HOBO Energy Logger
- 6m cable length (extension cables available)
Maximum input frequency:Â 120 Hz (120 pulses per second)
Measurement range: 0 – 65,533 pulses per logging interval
Resolution:Â 1 pulse
Lockout time: 45 µs ± 10%
Recommended input type:Â Electronic solid state switch closure or CMOS-level digital output (example: FET, opto-FET or open collector)
Preferred switch state:Â Active low input Normally open
Edge detection: Falling edge, Schmitt Trigger buffer (logic levels: low ≤ 0.6 V, high ≥ 2.7 V)
Minimum pulse width:Â 1 ms
Input/output impedance: 100 KΩ
Open circuit input voltage:Â 3.3 V
Maximum input voltage:Â 3.6 V
User connection:Â 24 AWG wires, 2 leads: white(+), black(-)
Operating temperature range: -40° to 75°C (-40° to 167°F)
Overall cable length: 6.5 m (21 ft.)
Housing:Â Weatherproof PVC housing protects input adapter electronics
Housing dimensions:Â 14 x 0.95 cm (5.5 x 0.375 in.)
Weight:Â 310 g (11 oz.)
Bits per sample:Â 16
Number of data channels:Â 1
Measurement averaging option: No (reports the number of pulses over the logging interval)
| Weight | 0.3 lbs |
|---|---|
| Dimensions | 3 × 3 × 4 in |
