Air Quality
Anemometers
Barometric Pressure
Communication Gateways
Complete Weather Stations
Data Loggers
I/O Modules
Lightning Detection
Rain Gauges
Temperature Humidity Sensors
Tornado Alert
Wind Switch
Campbell Scientific
Boltek
Davis Instruments
Instromet
Ocean Controls
Onset
RM Young
Campbell Scientific SP10 – 10 W Solar Panel
Overview
The SP10 is a 10-W photovoltaic power sources capable of recharging batteries. Its 6.1 m (20 ft) cable has stripped and tinned leads that connect to the PS150, PS200, CH150, CH200, or battery base of the CRVW3, CR3000, CR5000, CR7, CR9000X, or CR6. The SP10 has a sufficient charging source for many of our system configurations in tropical to temperate latitudes. It allows unattended operation of systems in remote locations, far from AC electrical sources.
Detailed Description
The SP10 includes mounting hardware consisting of one pn 17492 U-bolt and matching nuts. The U-bolt has a 5.398 cm (2.125 in.) space between the U-bolt legs. This hardware allows the solar panel to be mounted to a 0.75 in. to 1.5 in. IPS pipe [25.4 to 50.8 cm (1 to 2 in.) OD].
A 788 connector must be soldered onto the solar panel leads to use the SP10 with a 21XL rechargeable base.
Specifications
| -NOTE- | Solar panel characteristics assume 1 kW m-2 illumination and 25°C solar panel temperature. Individual panels may vary up to 10%. The output panel voltage increases as the panel temperature decreases. |
| Maximum Peak Power | 10 W |
| Current at Peak | 0.59 A |
| Maximum Allowable Wind Gust Speed |
|
| Voltage at Peak | 16.8 V |
| Cable Description | 20 AWG, 1-twisted pair |
| On-board Regulator Included | No |
| Cable Diameter | 6.35 mm (0.25 in.) |
| Dimensions | 41.9 x 26.9 x 2.3 cm (16.5 x 10.6 x 0.9 in.) |
| Weight | 2.1 kg (4.6 lb) |
| Weight | 6 lbs |
|---|---|
| Dimensions | 18 × 12 × 3 in |
